William Nawky Snowmobile Auction

Radius Rod

Tractive force

Types of tractive efforts

When a figure for tractive effort is quoted in technical documentation it is either for the starting tractive effort (at a dead start with the wheels not turning) or as the continuous tractive effort which will be quoted at a particular speed.

Maximum tractive effort

The maximum tractive effort is the maximum pulling force a vehicle or machine can exert under any (non-damaging) conditions. In general the maximum tractive effort will be obtained at a standstill and/or low speeds.

A variety of factors limit the maximum value:

The maximum tractive effort cannot exceed the 'Tractive mass (m)' x 'the coefficient of friction' () . If a vehicle attempts to supply more force (Ftractive>m) this will cause Wheel spin[note 1].

The gear ratios of drive components.

The maximum power capable of being supplied to the drive systems.

The safe working torques of the drive system components.

Continuous tractive effort

The continuous tractive effort is the tractive effort which is supplied at a given velocity. It may refer to the tractive effort required to keep a vehicle rolling without acceleration or the maximum force that can be produced at given speed.

Because of the relationship between Power (P), velocity (v) and force (F) of:

P=vF or P/v=F

the continuous tractive effort is inversely proportional to the velocity for constant power; the continuous tractive effort is therefore dependent on the power at rail[note 2]

In vehicles which have a power source (diesel engine, electrical supply etc) which is limited in terms of maximum total power (including steam engines[note 3]) the maximum continuous tractive effort at a given speed is limited by the engine's power.

Continuous tractive effort is quoted as a force at a given speed, and may be presented in graph form at a range of speeds as part of a tractive effort curve

Maximum continuous tractive effort

For vehicles propelled by electric motors the maximum continuous tractive effort can be less than the short term maximum tractive effort[note 4] at a given speed. The maximum continuous tractive effort is defined as:

"the tractive force delivered at full throttle notch (power) after the traction system has heated to maximum operating temperature"

Similar considerations also apply to hydrodynamic transmissions such as fluid couplings and torque converters which create more heat at stall than when free running. (see also Stall torque).

Tractive effort curves

Technical specifications of locomotives often include tractive effort curves, which show the relationship between tractive effort and velocity.

Schematic diagram of tractive effort vs. speed for a hypothetical locomotive with power at rail of ~7000kW

The basic shape of the graph is shown schematically (diagram right). The line AB shows the operation at the maximum tractive effort, the line BC shows the relationship of continuous tractive effort being inversely proportional to speed.

Tractive effort curves will often have graphs of rolling resistance superimposed on them - the intersection of the rolling resistance graph[note 5] and tractive effort graph gives the maximum velocity (ie when the net tractive effort is zero).

Rail vehicles

For a long, heavy train to accelerate from a stationary position at a satisfactory rate of acceleration, the locomotive must apply a large force. In general the resistive forces increase with velocity, so at a some given rate of movement the tractive effort will equal the resistive forces and the train will not be able to accelerate further - this gives rise to a limit in any train's top speed.

For a train running at a desired velocity, the locomotive needs only to provide enough forward force to counteract the counteracting forces of friction (wheels on rails, axles in bearings) and wind resistance (a small force compared to the other forces at work) on level track, plus the parallel-to-track vector component of gravity's acceleration of the train's mass on grades (which is fighting against the locomotive on uphill grades, and pushing it forward on downhill grades).

As well as been calculated theoretically from the characteristics of the engine, transmission system and the wheel diameter and mass of a locomotive, the tractive effort can also be obtained experimentally through combinations of drawbar strain sensors and a dynamometer car.

Power at rail is a railway term for the available power for traction.

Steam locomotives

An approximate theoretical value for the tractive effort of a single cylinder steam locomotive can be obtained by considering the cylinder pressure, cylinder area, and stroke of the piston[note 6] and the diameter of the wheel. The torque developed by the action of the linear motion of the piston depends on the angle that the driving rod makes with the tangent of the radius on the driving wheel.[note 7] For a more useful value an average value over the rotation of the wheel is used. The driving force is simply the torque divided by the wheel radius.

For a two cylinder locomotive the average force is twice that of a single cylinder locomotive.

Thus as an approximation the following equation can be obtained (for a 2 cylinder locomotive)[note 8]:

where

t is tractive effort

c is a constant representing losses in pressure and friction; normally 0.85 is used[note 9]

P is the boiler pressure[note 10]

d is the piston diameter (bore)

s is the piston stroke

D is the driving wheel diameter

The constant 0.85 was the Association of American Railroads (AAR) standard for such calculations, and certainly over-estimated the efficiency of some locomotives and underestimated that of others. Modern locomotives were equipped with roller bearings were probably underestimated.

European designers used a constant of 0.6 instead of 0.85, so the two cannot be directly compared without a conversion factor. In Britain, the main-line railways generally used a constant of 0.85 but builders of industrial locomotives often used a lower figure, typically 0.75.

The value of the constant c also depends on the cylinder dimensions and the time at which the steam inlet valves are open; if the steam inlet valves are closed immediately after obtaining full cylinder pressure the piston force can be expected to have dropped to less than half the initial force.[note 11] giving a low c value. If the cylinder valves are left open for longer the value of c will rise nearer to 1.

For other numbers and combinations of cylinders, including double and triple expansion engines the tractive effort can be estimated by adding the tractive efforts due to the individual cylinders at their respective pressures and cylinder strokes.[note 12]

Values and comparisons for steam locomotives

Tractive effort is the figure most often quoted when comparing the power of different steam locomotives, but its use can be misleading, because tractive effort shows the ability to start a train, not the ability haul it. Possibly the highest figure for starting tractive effort ever recorded was for the Virginian Railway's 2-8-8-8-4 Triplex locomotive, which in simple expansion mode had a starting T.E. of 199,560 lbf (888 kN) but this did not translate into power, for the boiler was undersized and could not produce enough steam to haul at speeds over 5 mph (8 km/h).

Of more successful large steam locomotives, those with the highest rated starting tractive effort were the Virginian Railway AE-class 2-10-10-2s, at 176,000 lbf (783 kN) in simple-expansion mode. The Union Pacific's famous Big Boys had a starting T.E. of 135,375 lbf (602 kN); the Norfolk & Western's Y5, Y6, Y6a, and Y6b class 2-8-8-2s had a starting T.E. of 152,206 lbf (677 kN) in simple expansion mode (later modified, resulting in a claimed T.E. of 170,000 lbf (756 kN)); and the Pennsylvania Railroad's freight Duplex Q2 attained 114,860 lbf (511 kN) the highest for a rigid framed locomotive. Later two cylinder passenger locomotives were generally 70,000 to 80,000 lbf (300 to 350 kN) of T.E.

Diesel and electric locomotives

For a diesel-electric locomotive or electric locomotive, starting tractive effort can be calculated from the stall torque of the traction motors (the turning force it can produce while at a dead stop), the gearing, and the wheel diameter. For a diesel-hydraulic locomotive the starting tractive effort depends on the stall torque of the torque converter.

In general, it is more common for heavy freight trains (such as Class 59, Class 60 and Class 66 locomotives) to have a high maximum tractive effort due to the mass which they haul. Passenger trains (such as Class 43 / Intercity High Speed Train locomotives) usually have much lower maximum tractive efforts due to the higher gear ratio required for a higher top speed.

See also

factor of adhesion, which is simply the weight on the locomotive's driving wheels divided by the starting tractive effort

Tractor pulling,Bollard pull - articles relating to tractive effort for other forms of vehicle

Rail adhesion

power classification - British Railways and London, Midland and Scottish railway classification scheme

References and notes

Notes

^ Wheel spin can damage the wheel and rail. Low frictional coefficients can be a problem for rail vehicles - eg see Slippery rail; Most locomotives carry a sandbox for use when the wheels are likely to slip

^ quoted figures will usually refer to the maximum continuous tractive effort - IE when the engine or other power source is operating at its maximum. ie at the maximum available power at rail.

^ Although it may seem that the maximum power of a conventional steam engine is limited at the rate at which the fireman can shovel coal into the steam engine, in fact the power will be limited by a variety of other factors, including - the rate of combustion of the fuel, the rate at which heat can be transferred across the heat exchanging mechanism from fire to water boiler etc

^ For electric motors higher torques require higher currents, which also produce greater resistive heating, the term maximum continuous current is a related figure for traction motors. In the short term currents higher than the maximum continuous current may not cause damage by overheating.

^ The graphs will typically show rolling resistance for standard train lengths or weights, both on the level or on an uphill gradient

^ It can be shown as a first approximation that half the stroke distance is approximately the same as the radial distance from the coupling of the driving rod to the centre of the driven wheel

^ The relationship is simply Torque = Forcepiston x R (the radial distance to the point of connection of the driving rod) x cos(A) where A is the angle the driving rod makes with the tangent to the radius from wheel centre to driving rod attachment

^ As with any physical formula, consistent units of measurement are required: pressure in psi and lengths in inches give tractive effort in lbf, while pressure in Pa and lengths in metres give tractive effort in N.

^ For a 'perfect' locomotive with cylinder piston pressure equal to boiler pressure (independent of stroke) and with no frictional losses the constant c can be taken as 1

^ note that the boiler pressure may be greater than the cylinder pressure

^ See Gas laws for an explanation.

^ The value of the constant c for a low-pressure cylinder is taken to be 0.80 (when the value for a high pressure cylinder is taken to be 0.85

References

^ Article : "So just what do terms used to describe the performance of locomotives and multiple units like Maximum Tractive Effort, Power At Rail, and Continuous Power mean?" Tony Woof B.Eng C.Eng MIEE

^ Handbook of Railway Vehicle Dynamics , Simon Iwnicki , page 256 , Google books books.google.com

^ a b Handbook of Railway Vehicle Dynamics, Simon Iwnicki, Illustrated, CRC Press, 2006, ISBN 0849333210, 9780849333217. Google books link:

^ XPT: Delivery, test runs and demonstration runs railpage.au.org see graph

^ The Gravita Locomotive Family voithturbo.de (page 2)

^ EURO 4000 Freight Diesel-Electric Locomotives vossloh-espana.com (page 2)

^ Eurorunner ER20 BF and ER20 BU, Diesel electric platform locomotives for Europe siemens.dk (page 3)

^ Marks' Standard Handbook for Mechanical Engineers By Eugene A. Avallone, Theodore Baumeister, Ali Sadegh, Lionel Simeon Marks page 166 Google Books books.google.com

Additional references and further reading

A simple guide to train physics

Tractive effort, acceleration and braking

Categories: Rail transport | Force | Introductory physicsHidden categories: Articles to be merged from April 2009 | All articles to be merged
About the Author

I am a professional editor from
China Suppliers
, and my work is to promote a free online trade platform.
http://www.frbiz.com/ contain a great deal of information about

fluorescent spray paint
,
camouflage spray paint

welcome to visit!

Radius Rod Bushing Kit $192.99 Radius Rod Bushing Kit; Front;

1983-1997 Ford Ranger Radius Rod Bushing Moog Ford Radius Rod Bushing K80007 $29.67 radius arm bushing high quality original equipment replacement. auto parts warehouse has extensive moog radius rod bushing catalogs.we are now offering free shipping on all moog radius rod bushing orders over $50.00. our secure moog radius rod bushing catalog is available every hour of everyday. shop with confidence for all your moog radius rod bushing needs. moog radius rod bushing are in stock and available today. save upto 60% off dealer price on your next moog radius rod bushing purchase. our online catalog contains a wide selection of the oem and aftermarket parts you need at unbeatable prices

1994-1995 Infiniti J30 Radius Rod Bushing OES Genuine Infiniti Radius Rod Bushing W0133-1621837 $44.93 . auto parts warehouse has extensive oes genuine radius rod bushing catalogs.we are now offering free shipping on all oes genuine radius rod bushing orders over $50.00. our secure oes genuine radius rod bushing catalog is available every hour of everyday. shop with confidence for all your oes genuine radius rod bushing needs. oes genuine radius rod bushing are in stock and available today. save upto 60% off dealer price on your next oes genuine radius rod bushing purchase. our online catalog contains a wide selection of the oem and aftermarket parts you need at unbeatable prices

1998-1999 Infiniti Q45 Radius Rod Bushing OES Genuine Infiniti Radius Rod Bushing W0133-1726717 98 99 $49.95 . Auto Parts Warehouse has extensive OES Genuine Radius Rod Bushing catalogs.We are now offering FREE shipping on all OES Genuine Radius Rod Bushing orders over $50.00. Our secure oes genuine radius rod bushing catalog is available every hour of everyday. Shop with confidence for all your oes genuine radius rod bushing needs. OES Genuine Radius Rod Bushing are In Stock and available today. Save up to 60% off dealer price on your next OES Genuine Radius Rod Bushing purchase. Our online catalog contains a wide selection of the OEM and aftermarket parts you need at unbeatable prices

1993 Infiniti J30 Radius Rod Bushing OES Genuine Infiniti Radius Rod Bushing W0133-1621908 93 $46.95 . Auto Parts Warehouse has extensive OES Genuine Radius Rod Bushing catalogs.We are now offering FREE shipping on all OES Genuine Radius Rod Bushing orders over $50.00. Our secure oes genuine radius rod bushing catalog is available every hour of everyday. Shop with confidence for all your oes genuine radius rod bushing needs. OES Genuine Radius Rod Bushing are In Stock and available today. Save up to 60% off dealer price on your next OES Genuine Radius Rod Bushing purchase. Our online catalog contains a wide selection of the OEM and aftermarket parts you need at unbeatable prices

1990 Infiniti Q45 Radius Rod Bushing Tezuka Infiniti Radius Rod Bushing W0133-1635144 $35.95 strong tezuka automotive /strong br tezuka automotive ind. co. ltd. of japan is a manufacturer of oe quality steering and suspension products auto parts warehouse has extensive tezuka radius rod bushing catalogs.we are now offering free shipping on all tezuka radius rod bushing orders over $50.00. our secure tezuka radius rod bushing catalog is available every hour of everyday. shop with confidence for all your tezuka radius rod bushing needs. tezuka radius rod bushing are in stock and available today. save upto 60% off dealer price on your next tezuka radius rod bushing purchase. our online catalog contains a wide selection of the oem and aftermarket parts you need at unbeatable prices

1990-1997 Honda Accord Radius Rod Bushing TER Honda Radius Rod Bushing W0133-1642774 $3.95 strong ter /strong br ter is a leading japanese manufacturer of oe quality polyurethane suspension bushings for passenger vehicles auto parts warehouse has extensive ter radius rod bushing catalogs.we are now offering free shipping on all ter radius rod bushing orders over $50.00. our secure ter radius rod bushing catalog is available every hour of everyday. shop with confidence for all your ter radius rod bushing needs. ter radius rod bushing are in stock and available today. save upto 60% off dealer price on your next ter radius rod bushing purchase. our online catalog contains a wide selection of the oem and aftermarket parts you need at unbeatable prices

2000 Infiniti QX4 Radius Rod Dorman Infiniti Radius Rod W0133-1897009 00 $85.95 Dorman ProductsDorman Products, Inc. is a leading supplier of automotive products and hardware to the automotive aftermarket.. Auto Parts Warehouse has extensive Dorman Radius Rod catalogs.We are now offering FREE shipping on all Dorman Radius Rod orders over $50.00. Our secure dorman radius rod catalog is available every hour of everyday. Shop with confidence for all your dorman radius rod needs. Dorman Radius Rod are In Stock and available today. Save up to 60% off dealer price on your next Dorman Radius Rod purchase. Our online catalog contains a wide selection of the OEM and aftermarket parts you need at unbeatable prices

1990-1997 Honda Accord Radius Rod Bushing TER Honda Radius Rod Bushing W0133-1642514 90 91 92 93 94 95 96 97 $4.95 TERTER is a leading Japanese manufacturer of OE quality polyurethane suspension bushings for passenger vehicles.. Auto Parts Warehouse has extensive TER Radius Rod Bushing catalogs.We are now offering FREE shipping on all TER Radius Rod Bushing orders over $50.00. Our secure ter radius rod bushing catalog is available every hour of everyday. Shop with confidence for all your ter radius rod bushing needs. TER Radius Rod Bushing are In Stock and available today. Save up to 60% off dealer price on your next TER Radius Rod Bushing purchase. Our online catalog contains a wide selection of the OEM and aftermarket parts you need at unbeatable prices

1988-1991 Honda Civic Radius Rod Bushing OES Genuine Honda Radius Rod Bushing W0133-1712454 88 89 90 91 $7.95 bush only (4 per car). Auto Parts Warehouse has extensive OES Genuine Radius Rod Bushing catalogs.We are now offering FREE shipping on all OES Genuine Radius Rod Bushing orders over $50.00. Our secure oes genuine radius rod bushing catalog is available every hour of everyday. Shop with confidence for all your oes genuine radius rod bushing needs. OES Genuine Radius Rod Bushing are In Stock and available today. Save up to 60% off dealer price on your next OES Genuine Radius Rod Bushing purchase. Our online catalog contains a wide selection of the OEM and aftermarket parts you need at unbeatable prices

1966-1977 Ford Bronco Radius Rod Bushing Moog Ford Radius Rod Bushing K8146 66 67 68 69 70 71 72 73 74 75 76 77 $33.81 Radius Arm Bushing, High Quality Original Equipment Replacement. Auto Parts Warehouse has extensive Moog Radius Rod Bushing catalogs.We are now offering FREE shipping on all Moog Radius Rod Bushing orders over $50.00. Our secure moog radius rod bushing catalog is available every hour of everyday. Shop with confidence for all your moog radius rod bushing needs. Moog Radius Rod Bushing are In Stock and available today. Save up to 60% off dealer price on your next Moog Radius Rod Bushing purchase. Our online catalog contains a wide selection of the OEM and aftermarket parts you need at unbeatable prices

Radius $244.99 Earl Kaminsky Radius - Limited Edition

Rod $6 Rod

RADIUS $27.99 The subject of security never strays far from the minds of IT workers, for good reason. If there is a network with even just one connection to another network, it needs to be secured. RADIUS , or Remote Authentication Dial-In User Service, is a widely deployed protocol that enables companies to authenticate, authorize and account for remote users who want access to a system or service from a central network server. Originally developed for dial-up remote access, RADIUS is now used by virtual private network (VPN) servers, wireless access points, authenticating Ethernet switches, Digital Subscriber Line (DSL) access, and other network access types. Extensible, easy to implement, supported, and actively developed, RADIUS is currently the de facto standard for remote authentication. RADIUS provides a complete, detailed guide to the underpinnings of the RADIUS protocol, with particular emphasis on the utility of user accounting. Author Jonathan Hassell draws from his extensive experience in Internet service provider operations to bring practical suggestions and advice for implementing RADIUS. He also provides instructions for using an open-source variation called FreeRADIUS. "RADIUS is an extensible protocol that enjoys the support of a wide range of vendors," says Jonathan Hassell. "Coupled with the amazing efforts of the open source development community to extend RADIUS's capabilities to other applications-Web, calling card security, physical device security, such as RSA's SecureID-RADIUS is possibly the best protocol with which to ensure only the people that need access to a resource indeed gain that access." This unique book covers RADIUS completely, from the history and theory of the architecture around which it was designed, to how the protocol and its ancillaries function on a day-to-day basis, to implementing RADIUS-based security in a variety of corporate and service provider environments. If you are an ISP owner or administrator, corporate IT professional responsible for maintaining mobile user connectivity, or a web presence provider responsible for providing multiple communications resources, you'll want this book to help you master this widely implemented but little understood protocol.

Piep Show XXL Bird Feeder by Radius $249 The Radius Piep Show XXL Bird Feeder is the extra-large version of a timeless classic, great for all seasons. The sturdy bird house is made of powder-coated steel and anodized aluminum and can be hung up, inserted into the ground using a special rod, or combined with the concave base for a free-standing house. A slippery smooth surface of the stand keeps cats at bay. In reaction to the overabundance of low-quality products on the market today, RADIUS DESIGN creates indoor and outdoor furniture and home accessories of superior functionality, originality and modern style for savvy consumers. The majority of RADIUS DESIGN products are designed and made in Germany. The Radius Piep Show XXL Bird Feeder is available with the following: Details:Made of powder coated steel and aluminum 118.11" wireMade in GermanyDesigned by Ralph KraeuterOptions:Color: Green, Orange, Silver, or White.Option: No Post, Post Only, or Post with Base.Shipping: This item ships in approximately 2-3 days. Dimensions: Item: Depth 21.7 In., Width 17.7 In., Height 19.3 In.

Radius Arm $750.99 Radius Arm; Frame Brackets And Hardware;

Radius I $29.99 Kimberly Poloson Radius I - Framed Art Print

Radius II $29.99 Kimberly Poloson Radius II - Framed Art Print