William Nawky Snowmobile Auction

Shock Absorber

Shock Absorbers

A shock absorber could be defined as a mechanical device that is designed to dampen shock impulses, thus dissipating  kinetic energy. Pneumatic and hydraulic shock absorbers constitute a cylinder with a sliding piston inside it. The cylinder is filled with hydraulic fluid or air. This combination of fluid-filled piston and cylinder is known as a dashpot. Shock absorbers serve a number of vital applications and are an important component of automobile and motorcycle suspensions, aircraft landing gear, and acts as supports for different kinds of industrial machines. They help in cushioning vehicles on uneven terrains.

Listed below are the various kinds of Shock absorbers:

• The air shock absorber makes use of compressed air to smooth out excessive suspension movement. This kind of shock absorber helps heavily loaded vehicles to have better control on the road.

 

• The spring is combined with the shock absorber to create a coil over the shock absorber. This kind of shock absorber is suitable for different types of roads and offers the vehicle good control during cornering and braking. The spring's capability to compress and stretch enables a smoother, pleasurable ride.

 

• The damper shock absorber could be easily adjusted to deal with specific road conditions. The fluid in this type of shock absorber could be increased or reduced with the help of a valve. The adjustability provided by damper shock absorber gives vehicles good balance.

 

• The twin tube shock absorber makes use of oil. It consists of an outer chamber filled with air, that gets compressed as the oil is forced through the chamber. When the piston pulls out, the oil encounters resistance as it flows through the piston, as a result of which damping is generated.

 

• The mono tube shock absorber is equipped with a larger piston than most other shock absorbers. It has the ability to automatically adjust to different kinds of road conditions and could be installed at varied angles. The mono tube shock absorber is made of aluminium and therefore, it is lighter than other kinds of shock absorbers and also enables faster reduction of heat.

 

About the Author

The author is associated with http://www.ipfonline.com . http://www.ipfonline.com allows you to  efficiently and quickly search through product profiles of engineering and industrial products from Indian manufacturers.

Shock Absorber $7.8 Shock Absorber

Shock absorber $7.2 Shock absorber

BS502-003 Shock Absorber Unit $15.04 Shock Absorber

6062 Shock Absorber $9.87 Shock Absorber

2002 Shock Absorber 2pcs $9.02 Shock Absorber

7103 Rear Shock Absorber 2P $47 Shock Absorber

860001 Shock Absorber(Al.) 2P $22.56 Shock Absorber

Shock Absorber Unit(Green) $13.1 Shock Absorber Unit(Green)

Shock Absorber Unit(Orange) $13.1 Shock Absorber Unit(Orange)

Truggy Shock Absorber 2P $9.9 Truggy Shock Absorber 2P

Aluminum Shock Absorber 2pcs $16.05 Aluminum Shock Absorber 2pcs

Shock Absorber Unit $13 Shock Absorber Unit

Aluminum shock absorber 2pcs $16.06 Aluminum shock absorber 2pcs

Shock Absorber Caps 8P $2.7 Shock Absorber Caps 8P

Shock Absorber (Hard) 2P $4.65 Shock Absorber (Hard) 2P

Shock Absorber 2P $9.9 Shock Absorber 2P

Front Shock Absorber(Short) $40 Front Shock Absorber(Short)

Shock Absorber(Soft) 2P $14 Shock Absorber(Soft) 2P

Rear Shock Absorber(Long) $40 Rear Shock Absorber(Long)

Shock Absorber 2P(Al.) $21.93 Shock Absorber 2P(Al.)