Snowmobile Handle Grips
 |
US $26.95
New ATV models no longer come with a kick-starters these days and it is no wonder too because electric starters are more convenient and easier for both kids AND adult ATV users. Except for some ATVs that comes with BOTH electric and kick starts, batteries are usually a necessary item on the ATV. Since electric starters have become the norm on an ATV, it would be best if we learned up a little on how to maintain the ATV battery to avoid unnecessary mishaps.
Brief introduction on ATV batteries
There aren't all that many things you have to understand, know and remember about ATV batteries simply but in order to properly maintain your ATV battery, the first thing you'll need to know are the very basics. The Do's and the Don'ts. Most ATV batteries these days are lead-acid batteries which means that they are made out of lead plates, oxide, sulfuric acid and water solution. There are two common types of ATV batteries and they are the conventional type popularly known as 'floated' and then there are the AGM type of ATV batteries which translates into Absorbed Glass Mat.
The low-down on ATV battery maintenance
Usually, one would have to perform the usual ATV battery maintenance only 2 or 3 times a year. that shouldn't be all that hard to fit into your schedule. just do it during the weekend - in fact, if you have kids who complains of nothing to do and nowhere to go during the weekends, use that time to perform ATV maintenance! But let the kids do the general 'cleaning' part of the process, though unless they're old enough to be careful about getting themselves fried in the process of ATV maintenance!
You should never wear any jewelry when maintaining your ATV battery, so, remove them all before you start. Replace the jewelry with proper gloves, old and ready-to-be-discarded clothes and goggles. The ATV battery should be washed with a nice mix of baking soda and water - a few spoonfuls of baking soda with a pint of water should do the trick. Once done washing, check the fluid level of the ATV battery and refill it with distilled water. And right about now, connect the ATV battery to its charger and start trickle-charging the battery.
That's not the end of the ATV battery maintenance process because while charging the ATV battery, you should spend some time cleaning up all the connecting points inside the ATV, rub a little grease or Vaseline over the connections and tighten the positive cable connections. The ATV battery maintenance process is almost over - cover the positive connections of the ATV battery and then start greasing up and cleaning the negative connections now.
Here are some relevant sites that might be of interest to you in case you need help maintaining your ATV battery.
Marsha Maung is an ATV enthusiast enthusiastically promoting ATV riding as a sport and family activity! She runs and is one of the staff for one of the hottest and fastest-growing ATV sites right now.
http://www.atv4kids.com
http://www.batterytender.com
http://www.christiecbs.com
|
|
Foam Grips $8.1 Bikemaster Foam Grips Soft, closed cell foam Ribbed pattern, combined with foam material, provides for excellent vibration damping For 7/8", 5" overall length *Note: For use with ATV's, PWC's, and Snowmobile's without a twist throttle. |
|
|
Heated Grips $59.95 Moose Heated Grips 20 watts of heating power Increased rider comfort with even and consistent heat distribution from unique flex circuit technology Fits all 7/8" handlebars with no adhesive required Great feel and handling from the special molded rubber grips *Note: For use with ATV's, Snowmobile's without a twist throttle. |
|
|
Hurricane Grips $6.99 Scott Hurricane Grips For the serious competitor or the weekend rider Space-age soft TPR compound Minimum diameter for gripping power Grooving for wire ties All Scott grips are designed for 7/8" handlebars *Note: For use with ATV's, PWC's, and Snowmobile's without a twist throttle. |
|
|
932 Grips $14.99 Pro Grip 932 Grips Made of soft yet tear-resistant materials Inner layer is designed from a firm rubber compound that bonds easily to handlebars Grip end is made of hardened rubber to resist tearing For 7/8 in. handlebars with thumb throttles *Note: For use with ATV's, PWC's, and Snowmobile's without a twist throttle. |
|
|
Snowmobile Stand $89.99 CMP Snowmobile Stand This is the perfect warm up stand for racing or trail riding. Nothing improves the life of you motor, belt, track, and moving components more that warming them up prior to riding. This trackstand sits 22.5" tall and will handle the weight of any sled. Wide rear bumper support holds the sled firmly while you warm it up. Built in sheild provides protection from flying snow, ice, debris, or the occasional loose stud. Black powdercoated steel construction. Also works in the offseason to keep your track and shocks off the ground during storage. Measure your bumper height before ordering to determine if you need this standard stand or the tall stand. |
|
|
Safety Handle Grips - Green $15.99 Safety handles are made of a durable polyethylene design. Includes mounting hardware and 2 grips. |
|
|
Grip Strength Hand Grips Foam Handle $4.95 Grip Strength Hand Grips Foam Handle |
|
|
Grip Strength Hand Grips Contour Handle $5.95 Grip Strength Hand Grips Contour Handle |
|
|
Stealth Grips $7.95 Moose Racing Stealth Grips One compound, one pattern, and one price in ATV flange styles Special USA made compound feels soft, but wears like a harder compound Custom Moose Racing half waffle pattern with high traction chevrons Safety wire grooves don't interfere with grip comfort Extra thick end cap for increased strength Available in Black, Gray, Red, Orange and Blue Made in the USA *Note: For use with ATV's, PWC's, and Snowmobile's without a twist throttle. |
|
|
Cradle Grips $8 Tag Metals Cradle Grips If you’re looking for a great cost effective grip, look no further. With these Tag Metals Custom Grips you will get all the comfort and durability of a high priced grip with the low cost of an economy style grip. Cutting edge design includes a unique grip end that prevents premature tearing and a medium diameter to avoid arm pump Half waffles and grid texture laid out for optimal comfort and control An innovative 3 groove wiring system allows secure fastening TAG Metals grips install easily on all 7/8" diameter bars as well as TAG T2 handlebars Two innovative synthetic rubber compounds that provide the ultimate combination of tackiness, vibration dampening at a wide temperature range The sizes listed below refer to the two firmness compounds available *Note: For use with ATV's, PWC's, and Snowmobile's without a twist throttle. |
|
|
964 EVO Grips $14.99 Progrip 964 EVO Grips Extremely comfortable grip for ATV’s Perfect for sand, rain, or mud Size specifications: ? mm 22-22 Long. mm 120 *Note: For use with ATV's, PWC's, and Snowmobile's without a twist throttle. |
|
|
Complete Winter Pack with Grips $122.95 Moose Racing Complete Winter Pack with Grips Kit comes complete with easy-to-install heated grips and thumb warmer Mountable controller regulates heat between the thumb and grips Dual-zone temperature control Five levels of heat LED light level indicators Two-hour auto shut-off Multiple mounting options Fits any 7/8" bar Independent control between grips and thumb warmer No adhesive required Maximum 20W at 14V *Note: For use with ATV's, Snowmobile's without a twist throttle. |
|
|
Warn Snowmobile Winch $358.95 When dirt and rock gives way to snow and ice, you can still take along the trusted recovery power of a WARN? winch. Introducing SnoWinch 1.5, the industry's first snowmobile recovery system that packs 1,500 lbs. of pulling power to get a sled out of trouble and back on the trail. The system comes complete with everything a rider needs to use the winch on a battery-powered snowmobile, including: integrated mounting plate with fairlead and handle. remote with 10' lead. two D-shackles. 8' and 25' recovery straps. and a Quick Connect plug for easy access to the battery power source. SnoWinch 1.5 can be rigged to pull a snowmobile from either the front or the rear and features 40' of 5/32 synthetic rope that is durable and easy to handle. Stores easily in a custom WARN bag when not in use and weighs just 15 lbs. |
|
|
Pilot II Grips $10.99 Fly Racing Pilot II Grips The Pilot II is a dual compound grip that incorporates new technologies to provide you with the ultimate in control and comfort. Soft outer compound helps decrease vibration and arm pump. *Note: For use with ATV, PWC, and Snowmobile applications |
|
|
Full Diamond Grips $8.99 Pro Taper Full Diamond Grips The Single Density grip is Pro Taper’s bread & butter when it comes to their grip line. They offer a wide variety of compounds and patterns to suit every rider's style and preference. *Note: For use with ATV's, PWC's, and Snowmobile's without a twist throttle. |
|
|
Dual Compound Grips $12.99 Renthal Dual Compound Grips The new dual compound combines the longevity of the Renthal firm grip and the feel of the soft compound The result is longer life and greater comfort Renthal grips have been developed and tested using input and assistance of top factory race teams from Europe and the USA Choice of three advanced synthetic rubber compounds specially formulated to achieve the optimum combination of strength, tackiness, and shock absorption to suit every riding condition and riding style Using a Raised Diamond Surface gives excellent feel, shock absorption, low mud retention and allows the use of the lowest possible grip diameter *Note: For use with ATV's, PWC's, and Snowmobile's without a twist throttle. |
|
|
Snowmobile Problem Sports Mug by CafePress $15 My drinking buddies have a snowmobile problem. Sports Mug The perfect size for your favorite morning beverage or late night brew. Large, easy-grip handle. Treat yourself or give as a gift to someone special. Measures 3.75 tall, 3 diameter. Dishwasher and microwave safe. |
|
|
Pillow Top Lite Grips $11.99 Pro Taper Pillow Top Lite Grips Unique pillow top pattern reduces vibration and cushions impact Inner core compound perfects the bonding interface with bars ANTI-Rip Tip uses denser compound to increase life of grip designed to self-clean and shed mud away from outer surface Tacky gel-like surface compound is perfect for off road riders *Note: For use with ATV's, PWC's, and Snowmobile's without a twist throttle. |
|
|
Dual Density Grips $9.99 Smith Dual Density Grips Smith's streamlined, half waffle grip design works with palm pad to reduce arm pump Thermoplastic rubber compounds promote extended wear and tear resistance Anti-vibration palm pad provides maximum vibration dampening and comfort Streamlined, half waffle design works with palm pad to reduce arm pump Grooved for safety wire *Note: For use with ATV's, PWC's, and Snowmobile's without a twist throttle |
|
|
Synergy Full-Waffle Grips $8.99 Pro Taper Synergy Full-Waffle Grips Custom Kraton rubber compound provides long wear and tear resistance Full waffle pattern minimizes vibration Available in both soft and medium compounds *Note: Soft compound Grip is Light grey, Medium compound grip is dark grey. **Note: For use with ATV's, PWC's, and Snowmobile's without a twist throttle. |
|
|
Deuce ATV Grips $13 Deuce ATV Grips by Scott Double Density grip Half waffle design with soft density palm area Medium density waffle pattern delivers maximum comfort and durability Soft density palm area reduces vibration, arm pump and fatigue Integrated safety wire channel *Note: For use with ATV's, PWC's, and Snowmobile's without a twist throttle. |
|
|
Gaming Handle Grips for PSP 2000 and 3000 (Black) $14.79 HighlightsHigh performance gaming handle grips for PSP 2000 and 3000 modelsGreat for prolonged gaming on your PSPComfortable to hold and useKick-out stand allowing you to conveniently view movies, pictures and listen to musicSpecificationColor: BlackDimensions (cm): 20 x 14 x 4Weight (Kg):0.12Package Contents1 x Grips |
|
|
Allen™ - T-Handle Cushion-Grips Hex Keys $9.6 Ergonomically designed hex key with cushion grip for added comfort. Hex keys are made from strong alloy steel T-handle with cushion grips adds comfort Minimal distortion and rounding on hex key edges |
|
|
Raider Black Snowmobile Trunk Bag $143.42 Outfit your snowmobile with this Trunk Bag from Raider, featuring a PU coated cordura construction with a tricot laminate for water resistance. This bag also offers a reflective piping for safety, and an easy to carry handle.Brand: RaiderTrunk BagModel: BCS-41Color: BlackReflective pipingBeverage holderHard plastic sidesQuick release bucklesInner mesh storage pocketSnowmobile applications onlyWater resistantMaterials: PU coated cordura with tricot laminateDimensions: 13 inches high x 19 inches wide x 9 inches deep |
|
|
Pillow Top Lite Grips With Flange $11.99 Pro Taper Pillow Top Lite Grips With Flange Unique pillow top pattern reduces vibration and cushions impact Inner core compound perfects the bonding interface with bars ANTI-Rip Tip uses denser compound to increase life of grip designed to self-clean and shed mud away from outer surface Tacky gel-like surface compound is perfect for off road riders *Note: For use with ATV's, PWC's, and Snowmobile's without a twist throttle. |
|
|
Eat, Sleep, Snowmobile Sports Mug by CafePress $15 Eat, Sleep, Snowmobile t-shirts, stickers, license plate frames, and gifts. Sports Mug The perfect size for your favorite morning beverage or late night brew. Large, easy-grip handle. Treat yourself or give as a gift to someone special. Measures 3.75 tall, 3 diameter. Dishwasher and microwave safe. |
|
|
2PCS Foam Road Bike Bicycle Handle Bar Grips Black and Blue $4.99 Description:Bicycle Foam Grips help absorb vibration and give the rider a more comfortable feel and ride.Dual compound Bike Foam Grips won't slip on the bar or in your hand.Aggressive design works great even in nasty conditions.Durable foam is superlight and comfortable.The Foam Handle Grips come with matching end plugs.Inner diameter is 2cm.These grips measures about 10.8cm in length, 3cm in diameter.Weight: 28gPackage Contains:2 x Foam Bar Grips with End Plugs |
|
|
Pair Road Bike Bicycle Foam Handle Bar Grips Black and Red $4.99 Description:Bicycle Foam Grips help absorb vibration and give the rider a more comfortable feel and ride.Dual compound Bike Foam Grips won't slip on the bar or in your hand.Aggressive design works great even in nasty conditions.Durable foam is superlight and comfortable.The Foam Handle Grips come with matching end plugs.Inner diameter is 2cm.These grips measures about 10.8cm in length, 3cm in diameter.Weight: 28gPackage Contains:2 x Foam Bar Grips with End Plugs |
|
|
Jet Snowmobile $39.99 Jet Snowmobile - Giclee Print |
|
|
Couple on a Snowmobile $24.99 Couple on a Snowmobile - Photographic Print |
|
|
Teddies with Snowmobile $49.99 Teddies with Snowmobile - Giclee Print |
|
|
Man on Snowmobile $24.99 Man on Snowmobile - Photographic Print |
|
|
Kitchen Brush, Oxo Good Grips $4.15 Oxo "Good Grips" Oxo Kitchen Brush. Durable plastic neck. Stiff bristles for super cleaning. Soft, comfortable handle. Dishwasher safe. |
|
|
Mango Splitter, Non-Slip Good Grips Handle $10.45 Mango Splitter. Half a mango in seconds without having to carve out the seed. The OXO Good Grips Mango Splitter removes the mango seed and slices the fruit in half with just once press, giving you a ready to eat mango quickly and easily.The OXO Mango Cutter features a specially shaped stainless steel blade that glides through a mango and makes a perfect cut every time. The Mango Splitter features a strong white plastic base with soft, non-slip Good Grips handles.The Mango Splitter is dishwasher safe for easy cleaning. |
|
|
Snowmobile Snot Funny Large Mug by CafePress $18 Excessive snowmobiling may cause frozen snot Funny snow machine, sled or snowmobile t-shirts, hats or a hoodie, sweatshirt beer mug to warm up. Great snowmobiling gifts. Funny Large Mug Super-size your favorite beverage or just size-up to avoid spills with our hefty, 15 oz. ceramic Large Mug. Large easy-grip handle. When you need more, mug it up. Measures 4.5 tall, 3.25 diameter. Dishwasher and microwave safe. |
|
|
Melon Baller, Oxo Good Grips $6.65 Oxo "Good Grips" Melon Baller. The OXO GOOD GRIPS Melon Baller has two stainless steel heads for making melon balls in different sizes. The soft, slim handle is comfortable to grip and makes it easy to turn the Melon Baller around as you use both size heads. Our Melon Baller is perfect for fruit salads and garnishes and is also handy for creating small, colorful scoops of sorbet for a festive dessert. Features two scooping ends in different sizes. Sturdy, stainless steel heads. Soft, comfortable handle. Perfect for fruit salads, garnishes, and desserts. Dishwasher safe. |
|
|
Shurhold / Shurhold 30" Fixed Length Handle w/Finger Grips / 730FG $17.26 Shurhold - Shurhold 30" Fixed Length Handle w/Finger Grips - 730FG |
